Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin GTX840 - Europe - (PPE+PA*)-GF40 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL GTX™ Resin GTX840 - Europe:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl GTX datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts
NORYL GTX™ 840 resin is a 40% glass reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade has high stiffness (flexural modulus 11860 MPa), excellent chemical resistance, and high heat resistance. NORYL GTX GTX840 resin is an excellent candidate for a wide variety of applications including automotive under-the-hood and water management.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 10 cm³/10min ISO 1133
Temperature 220 °C -
Load 5 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 13900 MPa ISO 527
Stress at break 198 MPa ISO 527
Strain at break 2 % ISO 527
Flexural modulus 12300 MPa ISO 178
Charpy notched impact strength, +23°C 11 kJ/m² ISO 179/1eA
Izod notched impact strength, +23°C, 4mm 11 kJ/m² ISO 180/1A
Izod notched impact strength, -30°C, 4mm 11 kJ/m² ISO 180/1A
ASTM Data
Tensile Modulus 13520 MPa ASTM D 638
Tensile Strength at Break 178 MPa ASTM D 638
Elongation at Break 2 % ASTM D 638
Flexural Modulus 11860 MPa ASTM D 790
Rockwell Hardness R 108 - ASTM D 785
Izod Impact notched, 1/8 in 94 J/m ASTM D 256
Izod Impact notched, Low-Temperature 90 J/m ASTM D 256
Temperature -30 °C -
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 244 °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 258 °C ISO 75-1/-2
Vicat softening temperature, B 246 °C ISO 306
Vicat softening temperature, 120°C/h 50N 246 °C ISO 306
Other propertiesValueUnitTest Standard
Humidity absorption 0.1 % Sim. to ISO 62
Density 1450 kg/m³ ISO 1183
Density 1450 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 95 - 105 °C -
Pre-drying - Time 3 - 4 h -
Processing humidity ≤0.07 % -
Melt temperature 295 - 315 °C -
Mold temperature 75 - 120 °C -
Zone 1 275 - 315 °C -
Zone 2 280 - 315 °C -
Zone 3 290 - 315 °C -
Screw speed 20 - 100 rpm -
Back pressure 0.3 - 1.4 MPa -
Characteristics
Processing
Injection Molding
Applications
Automotive
Regional Availability
Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.